Guides
Last updated 15 November 2026
Choosing solar and electrical equipment is mostly about matching capacity to your real load. These guides explain what to check before you buy, and how the parts of a system fit together.
Sizing a solar system for a home or shop
Start from a load list, not from a panel wattage. Write down each appliance you want to run, its rated watts (on the label or in the manual) and how many hours a day it runs. Multiply watts by hours for each item, then add them up: that total is your daily energy need in watt-hours. Panels are then sized from that figure plus a margin for cloudy days and system losses, and the battery from the share of the load you want to keep running after sunset.
On-grid, off-grid or hybrid inverter
An on-grid inverter feeds the grid and stops when the grid fails. An off-grid inverter runs only from a battery bank, so it needs enough battery capacity for the whole night. A hybrid inverter does both: it charges a battery and exports surplus, and it keeps selected circuits live during an outage. Choose by what you need during load shedding, not by price alone, and size the inverter above your continuous load with headroom for motor and fridge start-up surges.
Lead-acid or lithium battery
Tubular lead-acid batteries cost less up front and are proven in IPS use, but they are heavy, need ventilation, and should not be discharged deeply, so a usable capacity figure is well below the printed Ah rating. LiFePO4 lithium batteries cost more, allow a much deeper discharge, hold their voltage better under load, and last for more cycles. For daily cycling, compare cost per usable kilowatt-hour over the life of the battery rather than the sticker price.
Cables, breakers and protection
A cable must carry more current than the breaker protecting it, or the cable becomes the weak point. Long runs also lose voltage, so distance matters as much as cross-section. Use MCBs for final circuits and MCCBs for mains and large feeders, and check that the breaking capacity in kA is above the prospective fault current at that point. For solar DC strings use DC-rated cable, fuses and isolators, never AC parts. In a lightning-prone country, earthing and surge protection are part of the system, not an optional extra.
Before you order
Ask for the datasheet and check that the model number on the box matches it. Confirm who honours the warranty and for how long, in writing. Match inverter, battery and panel voltages to each other before buying, and keep the invoice. If you are unsure, send us your load list and we will size the system for you.
Browse the shop by category for solar panels, inverters, batteries, cables, breakers and switchgear, or contact us for a sizing check.